계측기렌탈, 계측기대여 - Analyzer/Meter(LCR,Impedance,etc) _ 비스타컴

계측기렌탈, 계측기대여 - Analyzer/Meter(LCR,Impedance,etc) _ 비스타컴

비스타컴은 계측기 판매, 계측기렌탈, 계측기대여등을 전문으로 하는 업체입니다.

고객님의 작은 문의라도 소중히 여기며, 고객님의 만족을 위해 끊임없이 노력하고, 새로운 가치창조를 만들기위해 노력할것을 약속드립니다.

비스타컴을 사랑해주시고, 응원해 주시는 모든분들께 감사를 드리며, 더욱 겸손한 자세로 고객님께 인정받는 기업이 될 것을 약속드립니다.

감사합니다.

비스타컴 임직원일동

■  계측기렌탈, 계측기대여 - R&S FSUP26

R&S FSUP Signal Source Analyzer

* Frequency range up to 26.5 (up to 110 GHz with external mixers)

* Maximum dynamic range through cross-correlation 

* Analysis of settling in time domain 

* Oscillator characterization

* Detection, suppression and listing of interference

* Maximum flexibility for phase noise measurements

* Low-noise source for supply and tuning voltages

* Analysis of signals with digital and analog modulation

Description

The R&S FSUP is a highly flexible phase noise tester with versatile measurement capabilities that combines the scope of functions of a high-end signal and spectrum analyzer with the benefits of a phase-noise-only tester.

■  계측기렌탈, 계측기대여 - Keysight E4991B

E4991B Impedance Analyzer, 1MHz to 500 MHz/1 GHz/3 GHz

* Three frequency options: 1 MHz to 500 MHz/1 GHz/3 GHz, upgradable

* ±0.65% basic accuracy and 120 mΩ to 52 kΩ impedance range (10% measurement accuracy range)

* Measurement parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, |Γ|, Γx, Γy, θΓ, Vac, Iac, Vdc1, Idc1 (1. Option 001 is required)

* Built-in DC bias (Option 001): 0 V to ±40 V, 0 A to ±100 mA

* 4-chnannel & 4-trace on 10.4 inch color LCD with touch screen

* Data analysis function: Equivalent circuit analysis, limit line test

* Dielectric/magnetic material measurement (Option 002): |εr|, εr', εr'', tanδ(ε), |μr|, μr', μr'', tanδ(μ)

* Temperature characteristics measurement (Option 007) and reliable on-wafer measurement (Option 010) capabilities

Description

The E4991B Impedance Analyzer has a frequency range of 1 MHz to 3 GHz. The E4991B provides 0.65% basic accuracy over a wide impedance range with a 40 V built-in DC bias source (Option 001). The equivalent circuit analysis function supports seven different multi-parameter models and helps you to simulate your own equivalent parameter values of components.

Three frequency options (1 MHz to 500 MHz/1 GHz/3 GHz) and frequency upgrades allow you to choose the most appropriate option with the latest amount of investment.

Material measurement options provide temperature characteristics analysis capability (Option 007) and direct read function of permittivity and permeability (Option 002).

Probe station connection kit (Option 010) offers an accurate on-wafer or micro-component impedance measurement solution up to 3 GHz.

The E4991B supports a wide variety of test accessories that designed to make measurements simple and reliable.

Whether you are in R&D, QA or inspection, the E4991B is an ideal solution for characterizing and evaluating electronic components, semiconductor devices and materials.

■  계측기렌탈, 계측기대여 - Agilent 4286A

RF LCR Meter, 1 MHz to 1 GHz

* 1 MHz to 1 GHz, with 10 kHz steps

* 1% basic accuracy

* High-speed measurements: 15ms

* 1 m/3 m errorless cable with APC-3.5 test head

The 4286A RF LCR meter offers accurate and reliable measurements in order to improve the quality and performance of your electronic components or circuit design. The 4286A employs direct-current voltage-measurement technique, as opposed to the reflection-measurement technique, for more accurate impedance measurements over wide impedance range. Also, Q measurement can be much improved due to advanced calibration technique (typical Q accuracy: 6% @ 100 MHz, Q=100). So you can reduce the design uncertainty by measuring your device\\\'s true impedance values at RF range.

■  계측기렌탈, 계측기대여 - HP Agilent 4291B

4291B RF Impedance/Material Analyzer 

* Four component test fixtures (DUT size: 0.5 mm to 20 mm)

* Independent parameter selection in 2 channels

* Direct read-out permittivity, permeability (option)

* Two material fixtures (operating temperature: -55deg C to +200deg C)

* Versatile analysis (temperature, cole-cole plot, relaxation time)

* Sweep parameters (frequency, ac level, dc bias, temperature)

Description

The Keysight 4291B RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.

Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.

The Keysight 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.

The Keysight 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.